Mold Remediation in Gulf Shores

Local crews · Open 24/7 · (251) 351-8100

Mold is not a seasonal problem on the Gulf Coast. Mobile sits at the head of the bay and takes roughly 66 inches of rain in an average year, spread across every season rather than one wet stretch, and the air stays heavy between the storms. That combination means a building here does not need a flood to grow mold. It needs a slow leak under a raised floor, a supply line that ran while a rental in Gulf Shores or Orange Beach sat empty, or a house closed up over a warm week with the air conditioning turned off. Spores are already present in every structure on this coast, and the building itself is the food source. Moisture is the only variable anyone actually controls, and this climate supplies moisture for free. United Water Restoration Group of Mobile treats mold as a moisture problem first and a cleaning problem second. We find the water that fed the growth and stop it, contain the work area under negative pressure so the remediation does not spread the problem into rooms that were fine, remove what cannot be saved, and dry the structure back to a documented target.

Gulf Shores sits about fifty miles from our office on Halls Mill Road in Mobile, and it is the part of this territory with nothing between it and open water. Roughly fifteen thousand people live here year round, but the building stock is mid-rise condominium and vacation rental, which means a large share of the units are empty on any given day. That single fact changes how damage happens. A supply line that lets go in an occupied house gets caught within the hour. The same failure in a rental between guests runs until a neighbour hears it or a cleaner opens the door, and by then the water has been through the floor assembly and into the units below. United Water Restoration Group of Mobile handles water, fire and mold damage across Baldwin County and the beaches, working to IICRC S500 for drying and S520 for mold. Crews drive out from Mobile. We do not keep a storefront on the island, and we would rather say that plainly than imply otherwise. Call (251) 351-8100.

Crews dispatch 24/7 from our Mobile base at 3710 Halls Mill Rd A and cover all of Gulf Shores — one local team, no subcontracted call centers. See all services in Gulf Shores or read more about mold remediation.

Common Causes We See in Gulf Shores

  • Gulf Coast humidity keeping wall cavities and closets damp year-round
  • Air conditioning shut off while a house or rental sits empty
  • Crawl space moisture rising into the subfloor of raised homes
  • Condensate line backups and overflowing drain pans at the air handler
  • Slow supply line or angle stop leaks behind cabinets and toilets
  • Wind-driven rain past window flashing during a tropical storm
  • Slab-on-grade water wicking up drywall from the bottom plate
  • Roof damage or surge flooding left to dry on its own
  • Sweating ductwork and uninsulated lines in hot, humid attics
  • An earlier water loss dried with fans instead of dehumidification

While You Wait for the Crew

A few minutes of the right first moves can save thousands in damage. Here is what to do — and what not to do — before we reach Gulf Shores.

Do

  • Keep the affected room closed off from the rest of the house
  • Run the AC or a dehumidifier to bring humidity down
  • Photograph what you can see without disturbing it

Don’t

  • Spray bleach on drywall or wood — it feeds the problem below the surface
  • Point a fan at it — moving air spreads spores through the house
  • Tear out moldy material yourself without containment

Crews are standing by near Gulf Shores right now.

Call (251) 351-8100
Our office team answering a 24/7 call

Our Process

  1. 1

    You call, we answer

    Any hour, any day, a real person picks up — not a machine and not a national call center. You describe what you are looking at, and from that moment it stops being your problem to solve on your own.

  2. 2

    We assess

    Our crew works out how far it has really gone, including what you cannot see behind walls and under floors. You do not have to know what to look for, or guess how bad it is.

  3. 3

    We do the work

    What comes out, what gets dried, what can be saved — those are our calls to make, and we explain each one as we go. Readings are recorded throughout, so nothing rests on you taking our word for it.

  4. 4

    You get your property back to normal

    Our own team rebuilds what came out and hands the place back finished, with everything documented the way your adjuster expects it.

We Work With Your Insurance

Our crews document everything — photos, moisture readings, and a clear scope of work — in the format adjusters expect, and we communicate with your insurance company throughout the job. Gulf Shores homeowners always know what is happening and what their policy covers before work begins.

AllstateState FarmLiberty MutualProgressiveNationwideFarmers InsuranceAmerican Family InsuranceChubbUniversal Property & CasualtyHeritage Insurance
Technician walking a homeowner through the insurance scope on a tablet

Frequently Asked Questions

Do you serve my city, town or ZIP code?

Gulf Shores is inside the territory this office covers, along with Daphne, Fairhope, Foley, Mobile, Orange Beach and Saraland. Coverage follows your address rather than how far out a town sounds, so if you are near the edge of that list, give the cross streets or your ZIP code on the call and you will get a straight yes or no before anyone is scheduled.

The town I am in is not the one in your name — do you still come out here?

The city in the office name is where it is based, not the limit of where it works: Daphne, Fairhope, Foley, Mobile, Orange Beach and Saraland are covered the same way Gulf Shores is. Franchise territories are drawn by area rather than by the single town on the sign, which is why the name on the door and the town on your mail often differ. Confirm your address on the call rather than ruling yourself out.

How quickly can a crew reach my address?

That depends on where in Gulf Shores you are, the roads, and what the crews already have running, so any single figure published here would be guesswork. The phone is answered around the clock, and you get an honest arrival window for your own address on that call. If water is still coming in, say so first — the steps to take while you wait matter more than the drive time.

Do you work on rentals, condos, businesses and manufactured homes here?

Rentals, condos, storefronts, restaurants and manufactured homes are all routine work, and the building type changes the access and the drying plan more than it changes the method. ANSI/IICRC S500 sorts a loss into Class 1 through 4 by how much water the structure absorbed and how hard it is to dry, which reads the same in a crawl space as in an office. Who pays — owner, tenant or association — is set by your lease, declaration and master policy, so read yours.

Do you handle mold removal, or do I need a separate mold company?

Mold remediation is part of the same water-damage trade, and it is work this office performs. IICRC S520, the mold standard, defines the job as returning a space to what it calls Condition 1 — normal fungal ecology — by containing the area, removing contaminated porous material, HEPA-cleaning what stays, and correcting the moisture source. Worth knowing: a few states treat assessment and remediation as separate trades, so the inspection may come from an independent assessor.

How much does mold removal cost, and what does a mold test cost?

Pricing follows the size and type of growth, not a flat rate. IICRC S520 scopes a job by affected area and condition, and EPA mold guidance draws a line around ten square feet — a patch under that is a different job from contaminated wall cavities or a crawl space. Testing is priced separately from removal, and whether clearance testing sits inside a quote varies by job. You get a written scope before work starts; inspection terms are confirmed on the call.

Do you test and inspect for mold, or only remove it?

Both halves exist, and they are deliberately not always the same hands. Several states regulate mold assessment and mold remediation as separate trades and bar one firm from doing both on the same property. This office inspects for moisture and visible growth; where a written protocol or clearance sampling is called for, an independent assessor supplies it. IICRC S520 grades what an inspection finds as Condition 1, 2 or 3 — settled spores and active growth are not the same finding.

How do you find mold you can't see, and is there a test afterward that proves it's gone?

Hidden growth is found the same way hidden water is: moisture meters, thermal imaging and cavity inspection, with readings compared against a dry standard elsewhere in the same building. On pre-testing, EPA guidance is blunt — when growth is visible, sampling is usually unnecessary, because the response does not change. Afterward, IICRC S520 calls for post-remediation verification: the area is inspected and, where the protocol requires it, sampled, with Condition 1 as the target. Scope varies by job.

What does mold remediation involve step by step, and do I have to move out while you work?

The sequence in IICRC S520 is containment first, then removal, then cleaning, then verification. Plastic containment with negative air pressure and HEPA filtration — HEPA media captures 99.97 percent of particles at 0.3 microns — is what keeps the cutting from seeding clean rooms. Contaminated porous material comes out, surfaces are HEPA-vacuumed and wiped, the structure is dried, and the area is checked afterward. Many households stay put; whether yours can depends on the rooms involved and who lives there.

Is it black mold, or just mildew or a water stain — can you tell the difference?

Color is not a diagnosis, and the species rarely changes the plan. CDC guidance says it is not necessary to identify what is growing, because mold found indoors should be treated the same way with respect to removal. IICRC S520 grades active growth as Condition 3 whatever the species, and works from moisture readings rather than appearance. A technician can usually tell growth from old staining on site; naming a species means laboratory sampling through an independent assessor.

Will the mold come back after it is removed?

Regrowth tracks the water, not the cleaning. EPA guidance is explicit that mold spores are present indoors everywhere, so what gets controlled is dampness rather than spores — keeping indoor relative humidity under 60 percent, correcting the leak or ground moisture, and adding a vapor barrier or dehumidification where a crawl space needs it. Growth that comes back in the same spot almost always means the source was never found. Conditions differ house to house.

Do you remove mold in a crawl space or attic, and can mold under the house reach the living space?

Unfinished space is in scope, and it is often where growth starts. Air moves upward through a floor system, so a damp crawl space feeds the rooms above it, and EPA guidance treats the structure as one moisture envelope rather than separate boxes. Attics usually trace to a roof leak or a bath fan venting into the space. The work follows IICRC S520: contain, remove contaminated material, HEPA-clean, then hold humidity under 60 percent with a vapor barrier or ventilation as the structure requires.

Can I clean mold myself with bleach or a store-bought spray?

Small jobs, sometimes. EPA guidance puts the self-help line at about ten square feet of growth and says bleach is not recommended as routine practice — it lightens the surface while the material underneath stays wet and contaminated. Spraying or painting over growth before an inspection is worse than leaving it, since it hides the extent without removing it. Porous material that soaked through gets removed rather than cleaned, which is where IICRC S520 draws its own line.

Will you find and fix the leak that caused the mold, and which has to happen first?

Order matters: the water source gets corrected first, or the remediation is temporary. EPA mold guidance and IICRC S520 both treat moisture control as the precondition — the same guidance that puts the mold-growth window at 24 to 48 hours of wetness. A technician traces the source with moisture mapping and thermal imaging: plumbing, roof flashing, HVAC condensate, grading. Some repairs sit inside the restoration scope and some belong to a plumber or roofer, depending on what the inspection finds.

Is mold in my house dangerous to my health?

This one takes attribution rather than reassurance. The CDC and EPA describe damp indoor spaces as associated with coughing, wheezing and upper-respiratory symptoms, and with worsening asthma in people who already have it, and they treat people with weakened immune systems or chronic lung conditions as more sensitive. EPA guidance pairs that with a dampness target: indoor relative humidity under 60 percent. Whether mold explains a specific symptom is a question for a physician.

If there's mold in the air vents, do you clean the HVAC system and ducts too?

Where growth shows up in the vents, the system is inspected as part of the mold work, though whether the cleaning falls to this office or an HVAC contractor depends on the system. EPA guidance on air ducts holds that cleaning a system with mold growing in it will not hold unless the moisture feeding it is corrected first. Running the blower meanwhile moves particles room to room. Duct cleaning follows NADCA's ACR standard, using HEPA-filtered collection rated to 99.97 percent at 0.3 microns.

If I already have a mold report and remediation protocol, can you quote from it?

A written protocol is the right thing to send; it usually carries enough to build a scope from, because it already states the affected areas, the containment required and the clearance criterion — normally Condition 1 under IICRC S520. That standard expects remediation to follow the assessor's protocol rather than reinvent it. A site visit is often still needed to measure and check access, depending on how detailed the protocol is. Say on the call that you hold one.

If a home inspection finds mold on a house I'm buying, what should I do before closing?

Get the moisture source identified before anyone argues about the growth, because that decides whether this is a cosmetic line item or a structural repair. A written scope from a remediator is what a seller concession or repair request gets negotiated against. EPA guidance puts the self-help threshold at about ten square feet; past that, it is remediation work, and IICRC S520 sets how it is verified. Timelines depend on access, scope and the closing date you are working to.

Does homeowners insurance cover mold removal?

Two things usually decide it. The mold has to follow a covered cause of loss — a sudden pipe failure generally qualifies, long-term seepage and humidity generally do not, and EPA guidance that material dried in the first 24 to 48 hours usually will not grow mold is part of why timing gets scrutinized. Most policies also carry a separate, much smaller mold limit, which is why an approved claim can pay less than the bid. Read your own wording and ask your adjuster.

Request Service Online

Tell us what happened and we will call you right back. For emergencies, calling (251) 351-8100 is always fastest — we answer 24/7.

A United Water Restoration Group of Mobile van heading out on an emergency call at sunset

In Case of Property Damage, Call:

251-351-8100

We answer around the clock and dispatch from right here in Mobile.

IICRC Certified · Water · Fire · Mold · 24/7 Emergency Response