Storm Damage Cleanup in Foley

Local crews · Open 24/7 · (251) 351-8100

When a storm hits Mobile, the aftermath can be devastating. Sudden roof leaks, flooded crawl spaces, and water-damaged living areas require immediate attention to prevent further complications like mold growth. You can call United Water Restoration Group of Mobile at (251) 351-8100 for prompt and professional storm damage cleanup. Our experienced team is well-acquainted with the Gulf Coast's unique weather challenges, ensuring quick response to protect your home from further damage. Our comprehensive services include water extraction, structural drying, moisture control, and mold prevention. Using state-of-the-art equipment such as low-grain refrigerant dehumidifiers and powerful air movers, we restore your property to its pre-loss condition. When you call us, we tap into our deep local expertise to quickly assess the situation, mitigate damage, and assist with insurance claims, streamlining the restoration process from start to finish.

Foley sits about forty miles east of our Halls Mill Road office in Mobile, inland from the beaches, at the point where Baldwin County traffic turns toward the Gulf. It is one of the fastest-growing towns on this coast, roughly twenty thousand people, and most of what has gone up here over the past twenty years is newer construction on a concrete slab. That single detail changes how water damage behaves in a Foley house. There is no crawl space under the floor to catch a leak, so water that gets loose runs sideways across the slab, under the flooring, into the bottom plate of the nearest wall, and wicks up the drywall from underneath. Nothing shows in the hallway until a baseboard swells or a room starts to smell. United Water Restoration Group of Mobile handles water, fire and mold damage here and across Baldwin County, working to IICRC S500 and S520 standards. Our crews and equipment drive over from Mobile. Call (251) 351-8100.

Crews dispatch 24/7 from our Mobile base at 3710 Halls Mill Rd A and cover all of Foley — one local team, no subcontracted call centers. See all services in Foley or read more about storm damage cleanup.

Common Causes We See in Foley

  • Hurricanes driving storm surge, causing flooding and water intrusion
  • Heavy rain leading to roof leaks and ceiling water stains
  • Tropical storms creating standing water in yards and crawl spaces
  • Downed trees damaging windows and siding, allowing water entry
  • Burst pipes resulting from heavy winds and debris impact
  • Storm surge infiltrating slab-on-grade homes, saturating flooring
  • Hardwood floor cupping from unexpected, extensive rainstorms
  • Subfloor saturation due to stormwater intrusion through windows
  • Crawl space flooding from high tides during coastal storms

While You Wait for the Crew

A few minutes of the right first moves can save thousands in damage. Here is what to do — and what not to do — before we reach Foley.

Do

  • Shut off electricity in affected areas to prevent electrical hazards
  • Document damages thoroughly with photos for insurance purposes
  • Remove small, undamaged items from wet areas to prevent further exposure
  • Ventilate the area where possible to aid in moisture reduction
  • Clear any debris blocking access points like doors for a safe environment

Don’t

  • Do not enter rooms with standing water and live electricity connections present
  • Avoid attempting to extract large amounts of water without professional assistance
  • Refrain from removing materials that may be contaminated with mold yourself
  • Don’t ignore damp spots on walls or ceilings, which can harbor hidden moisture

Crews are standing by near Foley right now.

Call (251) 351-8100
Restoration van arriving in the neighborhood

Our Process

  1. 1

    Assessment and Inspection

    Upon arrival, our team performs a detailed inspection using advanced thermal imaging and moisture meter readings to identify all affected areas, including those hidden from plain sight, such as wall cavities and crawl spaces, ensuring a comprehensive plan of action.

  2. 2

    Water Extraction

    We deploy powerful, industry-leading pumps and extractors to remove standing water swiftly from affected areas, including subfloors and crawl spaces, mitigating further damage and setting the stage for an effective drying process to protect structural integrity.

  3. 3

    Structural Drying

    Our expert team uses specialized air movers in conjunction with low-grain refrigerant dehumidifiers to effectively remove moisture from the air and structures, preventing mold growth and mitigating damage to salvageable materials, preserving your property’s value.

  4. 4

    Sanitization and Containment

    This step involves antimicrobial treatments and setup of containment barriers and negative air machines to stop mold growth, reduce airborne contaminants, and keep affected areas isolated and safe throughout the restoration process, maintaining clean air quality.

  5. 5

    Monitoring and Final Assessment

    Ongoing assessments using moisture mapping and carefully maintained daily drying logs ensure that every corner of your space is thoroughly dried. A final inspection confirms your property is ready for any final repairs, guaranteeing a successful restoration.

We Work With Your Insurance

Our crews document everything — photos, moisture readings, and a clear scope of work — in the format adjusters expect, and we communicate with your insurance company throughout the job. Foley homeowners always know what is happening and what their policy covers before work begins.

AllstateState FarmLiberty MutualProgressiveNationwideFarmers InsuranceAmerican Family InsuranceChubbUniversal Property & CasualtyHeritage Insurance
Technician walking a homeowner through the insurance scope on a tablet

Frequently Asked Questions

Do you serve my city, town or ZIP code?

Foley is inside the territory this office covers, along with Daphne, Fairhope, Gulf Shores, Mobile, Orange Beach and Saraland. Coverage follows your address rather than how far out a town sounds, so if you are near the edge of that list, give the cross streets or your ZIP code on the call and you will get a straight yes or no before anyone is scheduled.

The town I am in is not the one in your name — do you still come out here?

The city in the office name is where it is based, not the limit of where it works: Daphne, Fairhope, Gulf Shores, Mobile, Orange Beach and Saraland are covered the same way Foley is. Franchise territories are drawn by area rather than by the single town on the sign, which is why the name on the door and the town on your mail often differ. Confirm your address on the call rather than ruling yourself out.

How quickly can a crew reach my address?

That depends on where in Foley you are, the roads, and what the crews already have running, so any single figure published here would be guesswork. The phone is answered around the clock, and you get an honest arrival window for your own address on that call. If water is still coming in, say so first — the steps to take while you wait matter more than the drive time.

Do you work on rentals, condos, businesses and manufactured homes here?

Rentals, condos, storefronts, restaurants and manufactured homes are all routine work, and the building type changes the access and the drying plan more than it changes the method. ANSI/IICRC S500 sorts a loss into Class 1 through 4 by how much water the structure absorbed and how hard it is to dry, which reads the same in a crawl space as in an office. Who pays — owner, tenant or association — is set by your lease, declaration and master policy, so read yours.

How do you tell if water got behind the walls, under the floor or behind the cabinets?

Visible staining is usually smaller than the wet area. Technicians map it with a moisture meter and thermal imaging, then compare readings against a dry standard elsewhere in the same building — the restoration standard, ANSI/IICRC S500, works from that comparison rather than from how a surface looks or feels. Water trapped behind cabinets and under flooring shows up in the readings before it shows on the wall.

How many days does drying take, and how long is the whole job?

Three to five days is typical once air movers and dehumidifiers are running, though every loss is different and yours may need more time or less. The equipment stays until daily moisture readings match a dry standard in the same building, which is how ANSI/IICRC S500 defines dry rather than by a fixed count of days. Any rebuilding — flooring, drywall, paint — is a separate stretch of time after that and depends on what came out.

Do you pump out and extract standing water after a flood?

Standing water removal is the first thing crews do — submersible pumps for depth, then truck-mounted and portable extraction to pull what the pumps cannot reach, followed by drying equipment. Before extraction starts, the water gets categorized 1 through 3 under ANSI/IICRC S500, because clean supply water, used water and sewage are handled differently. The phone is answered around the clock, and you will get an honest arrival window for your address on the call.

What equipment do you use, and do you disinfect the area afterward?

Drying runs on air movers paired with low-grain refrigerant dehumidifiers, sized to the room's volume and the Class of loss the way ANSI/IICRC S500 lays out. Where material is contaminated or disturbed, HEPA vacuums and HEPA-filtered air scrubbers capture 99.97 percent of particles at 0.3 microns. Antimicrobial treatment is applied when the water category or the affected material calls for it, which depends on the specific loss rather than being routine.

What happens during water damage restoration, step by step?

Inspection first: the water is traced to its source, categorized 1 through 3 and the Class of loss is set, which is what ANSI/IICRC S500 bases the drying plan on. Then extraction, removal of material that cannot be dried, and placement of drying equipment with readings taken and logged daily until they match a dry standard elsewhere in the building. Repairs follow. What comes out, and how much, varies with the specific loss.

Can my carpet and flooring be dried and saved, or does it have to be torn out?

It depends on the water category and how long the material stayed wet, and that call is made from meter readings rather than appearance. Under ANSI/IICRC S500, carpet wet with clean Category 1 water can often be dried in place with the pad replaced, while Category 3 carpet and pad come out. Hardwood is sometimes dried with specialty mat systems; laminate rarely survives. Those are the typical outcomes; which one applies to your floor turns on the specifics.

Can I dry it out myself with fans and a dehumidifier, or do I need a professional?

Household fans move surface air but do not pull moisture out of the structure, so water inside wall cavities and under flooring keeps evaporating after the surface feels dry. That matters on a clock: EPA guidance is that wet material dried in the first 24 to 48 hours will in most cases not grow mold. A small clean-water spill caught immediately is often manageable; anything that soaked into walls, insulation or subfloor is not.

Can you find where the water is coming from if I don't know the source?

Identifying and stopping the source comes before drying — ANSI/IICRC S500 treats an unresolved source as a reason not to begin, since a structure still taking on water cannot be dried. The source also sets the water category, 1 through 3, which decides how wet material is handled. Moisture meters, thermal imaging and the shape of the wet area usually locate it, though some sources sit behind a pressurized line or roof assembly and need a plumber or roofer to open and test.

Do you handle water and moisture in a crawl space?

Yes — a crawl space dries like any other contained space: standing water pumped out, saturated insulation and vapor barrier pulled where they are holding moisture, then dehumidification until the framing reads at a dry standard. Water that has touched ground soil is Category 3 under ANSI/IICRC S500, so the material handling is stricter than a clean supply leak. Whether sealing or encapsulation afterward is in scope varies by office, so ask on the call.

Can you stop the water from getting in again?

Restoration work removes the water and dries the structure; keeping it out is a repair to whatever let it in, and that is a separate conversation. The inspection documents the entry point, which is what any fix has to follow. Exterior water usually traces to grading, gutters or flashing — the International Residential Code asks for the ground to fall six inches across the first ten feet out from the foundation. Which repairs are in scope depends on the property.

If the water sat for a while, will it cause mold or rot?

Time matters more than volume. EPA guidance is that wet material dried in the first 24 to 48 hours will in most cases not grow mold, and past that window the question changes from drying to assessing what has already grown — remediation then follows IICRC S520 rather than S500. Wood decay needs sustained moisture, generally above about twenty percent content, so a short soak and a week of standing water are different problems.

Does wet drywall have to be cut out, or can it be dried in place?

Often it can be dried in place. With clean Category 1 water, the baseboard comes off and the wall cavity is dried through small holes behind it, which leaves the wall intact. When the water was contaminated or the paper facing has lost strength, ANSI/IICRC S500 calls for removal, and the cut is usually made 12 to 24 inches above the wet line so the replacement lands on framing. The readings decide which applies.

Is the water in my home dangerous, and does the area need to be sanitized?

ANSI/IICRC S500 sorts water into three categories: 1 is clean supply water, 2 is used water such as dishwasher or washing machine discharge, and 3 is grossly contaminated, including sewage and water that has touched ground soil. Clean water does not stay clean as it sits in building materials. The EPA and CDC describe mold and sewage exposure as a health concern, particularly for children, older adults and anyone with asthma. Containment and antimicrobial treatment apply at 2 and 3, depending on the loss.

Request Service Online

Tell us what happened and we will call you right back. For emergencies, calling (251) 351-8100 is always fastest — we answer 24/7.

A United Water Restoration Group of Mobile van heading out on an emergency call at sunset

In Case of Property Damage, Call:

251-351-8100

We answer around the clock and dispatch from right here in Mobile.

IICRC Certified · Water · Fire · Mold · 24/7 Emergency Response